FOX 3D Auto Boom

Automatic camera beam movement synchronized with movement of the vehicle on the lift. All measurements can be done at floor level and adjustments at any convenient level. Provision for manual height adjustment also.

Fox 3D Auto Boom big
  • Vision based 3D Imaging technology using 2 High Performance SI (Scientific Image) Camera
  • Simultaneous Front and Rear wheel alignment (4×4)
  • Push Pull Runout /Setback / Thrust angle compensation
  • Lift level compensation at adjustment level
  • Unlimited memory for vehicle specifications
  • Option for selection of vehicle specification during alignment
  • Power failure data protection
  • Automatic tracking of Left & Right turns for Caster/Kingpin measurements
  • Adjustment of Camber in wheel Jacked-up position & Toe curve measurement
  • Rear Setback & Track width difference,
  • Toe adjustment in single Tie rod vehicle, Vehicle geometry measurements
  • Effortless Toe (Easy Toe) adjustment program
  • Camber measurement at Zero Toe
  • Drag link adjustment
  • Toe out on Turns & Lock angle measurements
  • Animated pictorial display of angles during alignment
  • Zoom in option for live parameters
  • Two Color Bar display for adjustment of all angles
  • Quick Wheel Alignment program by user defined
  • Data Manager Software for storing alignment results
  • Customer Address in printout & customer data edit option
  • 3-D Pictorial & Two color text printout
  • Multi-lingual program & Voice prompt
  • Two wheel Alignment program by fixing only front two target plates
Measurement Paraments Range Accuracy
Camber (Front / Rear) ± 15° 00' ± 00° 02'
Caster ± 28° 00' ± 00° 05'
Kingpin Inclination ± 25° 00' ± 00° 05'
Teo (Front/Rear) ± 20° 00' ± 00° 02'
Total Toe ± 40° 00' ± 00° 04'
Toe Out on Turns ± 20° 00' ± 00° 02'
Setback (Front / Rear ) ± 25 mm ± 2 mm
Thrust Angle ± 05° 00' ± 00° 02'
Runout ± 10° 00' ± 00° 02'
Included Angle ± 40° 00' ± 00° 05'
Track width difference ± 300 mm ± 5 mm
Power Supply 230V AC, 50Hz / 110V AC, 60Hz
Power Consumption 200W (Without Printer)
Power Consumption for Autoboom 400W (Without Printer)
Operating temperature 0°-50°C

Pdf IconFOX 3D AUTO BOOM         –       English.

Pdf IconFOX 3D AUTO BOOM    –
English / Français / Español.