Eco Gas 100

Eco gas 100
  • Conforms to ISO 3930.
  • NDIR technology.
  • Engine RPM measurement facility.
  • 7 Segment LED display.
  • Automatic condensate discharge.
  • Automatic zero calibration.
  • Digital span calibration.
  • RS232C serial port for PC interface.
  • NOx measurement.
  • Engine oil temperature measurement.
  • Portable light weight design.
  • DC operation suitable for “Road tests” using vehicle battery.
  • Display of Lambda / AFR / PEF.
  • Petrol / CNG / LPG selection.
  • Indication for Low / High flow.
  • Indication for battery Low / High voltage.
  • Electronic leak check facility.
  • Gas scrubber for cleaning of impure particles.
  • HC residue test.
Measurement parameters Range Resolution
CO (Carban Monoxide) 0 - 15% 0.01%
CO2 (Carbon Dioxide) 0 - 19.9% 0.01%
HC(Hydro Carbon) 0 - 20000 PPM 1 PPM
O2 (Oxygen) 0 - 25% 0.01%
NOx (Oxides of Nitrogen) 0 - 5000 PPM 1 PPM
AFR 0 - 30% 0.01%
Lambda 0.20 to 2.00 0.001
Engine RPM (Battery based) 400 to 9990 RPM 10 RPM
Engine Oil temperature 0 - 150°C 1°C
Operating temperature +5°C to +45°C
Measuring gas intake 3 Litres/minute
Leak test Electronic
Condensate discharge Automatic
Response < 15 Sec.(for Sample probe length of 3m)
Warm-up time @25°C & above < 3 minute
Zero calibration Automatic
Span calibration Digital
Power Supply 12V DC ±2V battery 100-265V AC, Single phase, 50-60Hz
Power 25W

Pdf IconEco Gas 100        –  English.